Free
WTS Updates
Version history, system requirements, the quick start guide (in German) and the other guides as PDF. You can download the installer right away; the station needs the free account for its first start.
Version history
1.9.1122026-11-06shipped
- behobenTrades on the chart, marks in the right place: the entry and exit marks now sit on the candle in which the trade happened. NinjaTrader executions go into the journal with the clock of the prices instead of the clock of this PC, once the station has measured the gap between the two clocks – if the Windows clock ran fast or slow, every mark used to sit that many candles off. The station cuts NinjaTrader rounds at proven flat points (where it knows the position for certain after a fill, that position is now written into the journal as well) instead of pairing them by size alone – a single missing fill or a cut-off window used to shift every later round. A trade that ended before the loaded history no longer sits on the first candle; if it began before it, its line starts at the left edge, without an entry triangle. Older journal rows stay as they are, their time included.
- geändertStop or target dragged through the price = out at once: if, while the price is live, you drag the stop or target of an open position to the other side of the price (long: stop at or above the bid, target at or below the bid; short mirrored at the ask), the station does not move the order but closes that leg's size at market at once and cancels its counterpart. This holds in the paper book and on accounts through NinjaTrader, MetaTrader 5, ATAS and Bookmap, in the chart, the heatmap, the DOM ladder and on the phone. Like flattening and PANIC, this exit needs no arming. Up to 1.9.111 such a drag went out as a change, NinjaTrader rejected it, and afterwards often only Close or PANIC helped. The preview announces the exit before you let go ("EXIT NOW" in the colour of the Flat button), afterwards the station reports, for instance, "Exited 2 @ market - line dragged through the price". A stop that protects no position is refused when dragged through the price ("wrong side - release = refused"), and nothing goes out. If an exit fails wholly or in part, the station says so loudly and with a warning tone (on the PC for 15 seconds), for instance "Exit failed - this slice is now UNPROTECTED, use Close/PANIC". On MetaTrader 5 and ATAS it cancels the position's orders only once the platform reports the position flat; otherwise every order stays, and the message names what is still open. If a position has no stop left at the broker, the protection line in the Chart Trader says "NO STOP at the broker - position UNPROTECTED", and a new protection can be set up again.
- neuDownload in per cent: while the station downloads an update, each of its windows shows at the bottom centre how far it has got, for instance "downloading 37 % (15.6 / 42.3 MB)", then the signature check and the installation; the notice takes no click away. If the download fails, the station keeps running ("the station keeps running, next try at the next start"). You see this only from the update after this one: the update to 1.9.112 itself still comes without the display, because it is loaded by the previous version.
- neuUpdate channel Latest or Stable: you now choose which versions the station installs by itself – at installation on the installer page "Updates" and at any time under Setup › Updates. Latest is every new version as soon as it is published, as before. Stable is only the version the provider marks as Stable; it never steps back – if the station is newer, it stays on its version until a newer one is marked Stable. Existing installations stay on Latest, with this update too: an automatic update leaves the choice as it is. A change applies from the next start. When this version is released, no version is marked Stable yet; whoever chooses Stable gets no update until the first version is marked.
- geändertBookmap: on a Bookmap account Flat and PANIC can close the wrong size or nothing at all – a fault of the Bookmap add-on that already existed in 1.9.111. There, after every Flat and every PANIC, check in Bookmap itself whether the position is closed, and otherwise close it there; on Bookmap accounts the tooltip of the Flat button and the message of an unconfirmed exit now say so themselves.
- geändertUnchanged and brought up to date: the NinjaTrader bridge stays 1.12 (no restart of NinjaTrader needed), terms and privacy statement stay in version 2.0 (no new consent). Manual (chapters 7, 8, 13 and 20) and help are brought up to date.
1.9.1112026-10-23shipped
- behobenNinjaTrader bridge 1.12 – please restart NinjaTrader after the update: the update brings the bridge DeepWebBridge.dll 1.12 and puts it into the NinjaTrader folder bin\Custom; NinjaTrader loads it only after a restart. If NinjaTrader was running during the update and held on to the old file, close NinjaTrader: the station puts the bridge in place by itself at its next start, or you press Setup › NinjaTrader bridge › "Update bridge"; the Version line then shows "installed v1.12". The bridge now moves to the next contract in time: energy (CL, MCL, NG, MNG, RB, HO) 3 business days before the real last trading day under the CME rule, US exchange holidays included, the micros on the day of their main contract – up to 1.11 the station showed, for instance, CL 11-26 for five more days after its last trading day (20 October); the metals (GC, SI, HG and their micros) 3 business days before the first notice day – until now gold and silver moved two to three weeks too early; 6E and M6E 3 business days before their last trading day (2 business days before the 3rd Wednesday of the month) instead of only after expiry. Equity indices and the other currencies (such as 6B, 6J, 6A) roll as before.
- neuStrategie Builder, strategy sync through the hub – off by default: your strategies can now stay the same on your PCs – only for an account the provider has unlocked the "Abgleich" (sync) right for (never on a test seat), and only on PCs where you switch sync on yourself: Builder › "Sync" tab, once with your account password. Beforehand the station shows what goes to the hub and what comes from there; with "keep on this PC only" a strategy stays here only, and the first sync deletes nothing. After that it syncs about every two minutes while it runs and your account is signed in. The hub (IONOS, data centre in Berlin) stores the strategies readable, not end-to-end encrypted. Whether alerts are on never travels, and sync never switches alerts on: for a strategy switched on here it takes over new rules (blocks, conditions and AI questions), switching on phone or share and a deletion from another PC only after you confirm here ("update waiting") – until then the previous version keeps running here; names, notes, texts, display and layout it takes over at once. If two PCs changed the same strategy, both stay – the one that reached the hub first keeps the name, the other is called "… (conflict copy)". Before every overwrite the station makes a backup ("Sync" tab, "Older versions", "Open as copy"); the old version of every strategy that 1.9.109 repaired is listed there now as well. Deleted strategies stay under "Recently deleted" for up to 30 days. "Turn off on this PC" ends sync on this PC, "Delete my strategies from the hub" deletes the copy on the hub. Without sync your strategies stay, as before, on the PC where you saved them.
- geändertTerms and privacy statement in version 2.0: new are strategy sync (privacy clause 3e; clause 5 names its time limits) and the picture of "Ai Quick" (clauses 1, 3 and 4). The terms add (clause 7): sync is a convenience and not a backup – the strategies on your PCs remain what counts. New for every account, with or without sync: the provider keeps backup copies of the hub data, account and support data included, for 30 days at most (privacy clause 5). Every account confirms both again at the next sign-in – no sign-in without both ticks. The sign-in dialog lists the changes. The TradingView consent (version 1.3) and the consent to the Strategie Builder's automatic AI runs stay – they are not asked again. Before you switch sync on, the "Sync" tab shows a notice on what is synced.
- neuChart, "Ai Quick" with picture and setup lines: like AI Scan, Ai Quick now sends a picture of the chart to your AI provider and, when the picture and the numbers show a clear trading zone, draws a small intraday setup into the chart: the lines "AI ENTRY", "AI STOP" and "AI TARGET"; without a trading zone it draws nothing. The station lets only a consistent setup through (entry at most 1 ATR from the price, stop 0.15 to 1.5 ATR, target at least as far as the stop and at most 4 ATR, valid 5 to 60 minutes) and removes it again as soon as its time is up (at most 30 minutes, adjustable 5 to 120), the price touches stop or target, it ran more than one stop distance towards the target before the entry, a new AI run (Ai Quick or AI Scan) starts or you change the market. Display only: no order, nothing on the phone; can be switched off under Setup › Chart ("Ai Quick setup lines").
- geändertChart, pictures: the pictures for AI Scan, Ai Quick and the trading journal now show only the chart, without the DOM ladder and speed of tape; the picture to the AI also without the Strategie Builder's lines and without the "AI NEXT 3" box. "Take screenshot" in the right-click menu still shows what is on the screen.
- neuChart, two new indicators, both off by default (chips in the "Indicators" panel): "Watermark" shows market and contract at the top left of the price area, for instance "NQ - 12-26". "Clock" is a clock above the chart, free to move and to resize, in local time or exchange time (CT), below it the time until the next important news, for instance "CPI in 12:34"; the dates come from the economic calendar with your calendar consent, otherwise from the built-in official US dates, without a request. The watermark, when switched on, is in the picture to the AI as well; the clock is in no picture.
- neuChart, "Strategies" dialog: if your account on this PC lacks all the WTS strategies, the "Strategie Builder" section now offers them – "Add all to my strategies" saves the missing ones as copies with Alerts off, same names are skipped (not on a test seat). The footer now says, for instance, "1 strategy" and "0 with Alerts on (at most 12 at the same time)": 12 is the limit of strategies switched on at the same time, not the number of your strategies.
- geändertManual (PDF), help and Builder Guide are brought up to date: in the manual the new 26.16 (sync) and 23.1 (Ai Quick), plus chapter 5 (Watermark and Clock) and chapter 9 (the "Strategies" dialog).
1.9.109Date unconfirmedshipped
- behobenStrategie Builder, "AI research": on the first start of 1.9.109 the station goes once through every saved strategy of every account on this PC and repairs the retired block in exactly three cases, nothing else. The "AI research" tick goes from every Custom AI (since 1.9.108 the AI has not received those data anyway); an "AI research" with no outgoing link is deleted with its links; and a copy of the old complex example "VAH rejection short, AI-confirmed" from 1.9.104 to 1.9.107 gets – only while it still has exactly that pattern – the wiring of the example since 1.9.108: "AI agrees" moves into the freed spot and feeds the entry directly, and your other changes to the copy stay. Every other "AI research" stays locked as since 1.9.108, and so does a strategy that would have errors afterwards although it had none before. A repaired strategy keeps its id. The station appends a line to the notes – for the example "WTS 1.9.109: retired AI research removed - rewired like the complex example since 1.9.108 (the custom AI alone confirms).", otherwise "WTS 1.9.109: retired AI research removed (it was empty since 1.9.108)." – if no "AI research" is left in the strategy and the notes still fit in 500 characters; your text is never cut. Strategies that are switched on stay switched on – only a switched-on copy of the old example is switched off by the station during the repair and always gets the entry "Builder: Alerts off for '…'" with its name in the builder's "Alerts" tab, even when the line no longer fits in the notes; if the line is appended, it reads "WTS 1.9.109: retired AI research removed - rewired like the complex example since 1.9.108 (the custom AI alone confirms); its Alerts were switched off - switch them on again if you want them.", and only you can switch it on again. The station keeps the old version of every repaired strategy on this PC and never deletes it by itself, only together with the strategy when you delete it; it cannot be loaded in the window.
- neuStrategie Builder: for every remaining "AI research" there is the button "Remove AI research" – in the line "AI research retired" of the notice "What the builder needs" and in the block's inspector below the lock sentence. It deletes every "AI research" of the strategy with its links and unticks "AI research" on every Custom AI, in one step that Ctrl+Z takes back; it is saved like any other change, and the message says "AI research removed - Ctrl+Z undoes it. Check the inputs that were linked to it." If the strategy's alerts are on, it asks first ("Alerts are on. Removing AI research can let alerts ring that could not ring since 1.9.108. …"): "Switch off and remove" switches them off like "Alerts off" and removes only once the station has confirmed the off; if they stay on, it removes nothing. Afterwards check the inputs "AI research" was linked to. On a test seat the button is not there.
- neuStrategie Builder, empty canvas: below "Load simple example" and "Load complex example" it now also offers the bundled templates – "11 WTS strategies come with the station - copies, Alerts stay off." – with "Add all to my strategies" (the same way as in the Examples menu) and "Choose one ...", which opens Examples at "WTS strategies"; "Add all to my strategies" is missing on a test seat and once all eleven names are in your strategies. If your account on this PC has none of the templates, a narrow strip at the top of the canvas says so as well – not on the empty canvas, which offers them already, and never on a test seat: "The 11 WTS strategies are not in your strategies on this station yet." with "Add all to my strategies", "Show them" and ×. It goes as soon as a template is in your strategies; × hides it for your account on this PC until the station restarts. Your own strategies stay on the PC where you saved them; every station comes with the eleven WTS strategies.
- behoben"Analytics" window: the tooltip of "Withdraw TradingView consent" – on the button in the footer as in the "Data sources" menu – now says "Analytics and the Strategie Builder nodes that use its data then load nothing from TradingView until you allow it again", and so does the message after withdrawing. Until now both named AI Analytics, removed with 1.9.108, instead of the blocks.
- geändertManual (PDF), help and Builder Guide are brought up to date: in the manual chapters 26.1 and 26.2 (the repair and "Remove AI research"), 26.3 (the empty canvas), 26.7 (the "AI research" tick) and 26.15 (the templates on the empty canvas and in the strip); in the Builder Guide the section "The eleven WTS strategies" and two new questions, in the help the question about the Strategie Builder. Terms and privacy statement stay in version 1.9 – there is no new consent. No NinjaTrader restart needed – the bridge is unchanged.
1.9.108Date unconfirmedshipped
- neuStrategie Builder: the station now ships the eleven WTS strategies as templates – on every PC and for every account, in the Examples menu under "WTS strategies" (WTS01 A to WTS03 D, ES on 2m, labelled in German). A click loads a template as a copy under its name; if your account already has that name, the copy is called "… (copy)". "Add all to my strategies" saves every template whose name is missing from your strategies, skips names you already have, stops at 30 strategies per account and names what no longer fitted – nothing is ever overwritten or deleted. The alerts of a copy are always off; only you switch them on. The tooltip names what a template needs: live data (not the simulator), for WTS02 and WTS03 level 2 and the heatmap history, for all eleven the economic calendar consent. The templates are teaching material, and updates never change your saved copies. Your own strategies stay on the PC where you saved them – on a second PC, fetch the templates there with "Add all to my strategies".
- neuChart, "Strategies" dialog: below the playbooks there is now a "Strategie Builder" section with all strategies of your account, those of the chart's market first. On/Off switches their alerts – the same switch as "Alerts on" in the Strategie Builder, whose window takes over the new state at once. Before every click the dialog reads the state again and does not switch again what is already set that way; a refusal by the station, such as "At most 12 strategies can have Alerts on at the same time - switch one off first.", appears word for word in the row. Off removes the strategy's markers from the chart, the heatmap and the phone – as does "Alerts off" in the Strategie Builder –, and On shows those of the last 48 hours again. Strategies are still built and edited in the Strategie Builder only.
- neuChart and heatmap: next to the markers, the "Builder signals" chip now also shows lines of every strategy with Alerts on and Share Signals – the levels of its paper trade position: entry (dotted while the paper order waits, solid once filled), stop (moves with break-even and trailing), T1 and T2 (until hit) and T3, labelled for instance "<name> SL 6516.50 paper". Paper lines come only from the station's live cycle, never from the simulator. The lines are 1 px thin, without a marker, without an × and without a mark on the price axis, can be neither dragged nor deleted and never place an order; hovering one shows "paper – never an order". They never go to an AI in a picture – not even with AI Scan –, never to the phone, and they do not appear in the DOM ladder.
- neuStrategie Builder: new block "Chart level" (63 in all, of which "AI research" is retired – 62 in the library). It shows a price of the strategy as a line in the chart and the heatmap, with its own label (up to 24 characters), line style (Solid, Dashed, Dotted) and colour (Bull, Bear, Neutral, Accent), labelled "<name> <label>" – display only: no alert, no order, no effect on other blocks; at most 6 per strategy, visible with Alerts on and Share Signals through the same "Builder signals" chip. The eleven "WTS strategies" templates use 31 "Chart level" blocks to show the levels they wait for; their alerts are the same as without them.
- geändertChart and heatmap, drawings: when a shape is too small for all its fields (×, bell, share, colour – depending on window and shape) – a small rectangle, a small zone, a short line, ray or pen stroke –, the whole row now stands outside it: for rectangle and zone above the top edge, right-aligned, otherwise below, otherwise left-aligned above or below, otherwise beside it; for line, ray and pen in the same places as for a long one – never on the shape itself and always fully in view. Until now a small shape – also after zooming out – lacked its colour field or all of its fields, leaving only the right-click. Shapes that carry all their fields stay as they were; in the "Analytics" window nothing changes.
- geändertAI Analytics: the day and scalp analyses are removed – the "AI Analytics" button in the dashboard, its own window, its runs and, in the chart, the lines "AI …", "SCALP …" and LONG/SHORT 15m. On the first start of 1.9.108 the station deletes once what was left of it on this PC – reports, switches, images and grades; there are no more requests for it. The "AI Analytics" unlock keeps its name and still unlocks the "Analytics" window as well as the AI and Analytics blocks and the AI Creator of the Strategie Builder. The "Analytics" window with "AI analysis" works as before once you have given the new TradingView consent (see below); AI Scan does not need it and works as before.
- geändertStrategie Builder: the "AI research" block, which read the results of AI Analytics, is retired. Saved strategies with it stay valid and can still be switched on; it always delivers "unknown", though, and the check warns: "AI research is retired (1.9.108): the AI Analytics day/scalp levels were removed – this node stays empty. Delete it; use Analytics level or Custom AI instead." It is no longer in the library, the quick menu or the AI Creator. The "AI research" data option of a Custom AI is retired as well: a set tick blocks no run, and the AI never gets that data. The complex example "VAH rejection short, AI-confirmed" now works without it.
- geändertTerms and privacy statement in version 1.9: AI Analytics is dropped, and the privacy statement records the one-time deletion of its data; the "WTS strategies" templates are teaching material – only a copy is loaded, the station never switches it on by itself, and you set the rules; the station shows the builder lines only in the chart and heatmap of this PC, and what you take into an alert stays an alert. Every account confirms both again at the next sign-in – no sign-in without both ticks. Also asked again are the TradingView consent (version 1.3, in the "Analytics" window; until then the station fetches nothing from TradingView, and "Analytics level", "Analytics context" and a Custom AI with "Analytics levels" stay locked) and the consent to the Strategie Builder's automatic AI runs (version 2, in the inspector of an AI block; until then no AI run starts by itself, "Run now" still works) – neither covers the removed day and scalp analyses any more.
- behobenPrivacy statement corrected: if the chart shows "Share Signals" markers during an AI Scan, they appear with their label – the first 14 characters of the alert title – in the picture sent to your AI provider as well. That has been so since 1.9.104; versions 1.7 and 1.8 had denied it.
- geändertManual (PDF), help and Builder Guide are brought up to date, among others chapters 7 and 11 (fields of small shapes), 9 (the "Strategie Builder" section in the "Strategies" dialog), 15 (AI Analytics – now only a placeholder under the same number), 26 (Chart level, lines in the chart and heatmap, Alerts off removes the markers, AI research retired) and the new 26.15 (the "WTS strategies" templates with their lines). No NinjaTrader restart needed – the bridge is unchanged.
1.9.107Date unconfirmedshipped
- neuStrategie Builder: 16 new blocks, 62 in all. For ZigZag swings "ZigZag leg", "ZigZag trend", "ZigZag climax" and "ZigZag divergence" (swing with volume and delta, trend, climax, volume divergence); for order book, heatmap and footprint "Book scanner", "Level watch", "Footprint", "Imbalance zones", "Absorption reversal", "Bubble sequence" and "Target check"; for the flow "Latch", "Sequence", "Choose", "Paper trade" and "Risk gate". On top of that "Math" rounds (floor, ceil, round), "News" also blocks after a release ("Block after release") and knows the Fed day, and an alert takes up to six values ({v1} to {v6}). "Book scanner" and "Level watch" need order book data (level 2) from the trading connection. The AI Creator knows the new blocks; it still refuses wishes for orders or automated trading. The Builder Guide describes all 62 blocks, the manual in chapter 26.
- neu"Paper trade" – alerts only: on "Go" the block follows a virtual position (market, stop or limit, targets with partial exits, break-even, trailing, time stop) on the prices of the station's market data connection and reports entry, targets, stop and exit as alerts. It never places an order – not even with the paper trading book – and its results are not trading results actually achieved: a limit order counts as filled as soon as the price touches it, slippage arises only when the price jumps across a stop, and fees are left out of account. "Risk gate" blocks by daily and weekly loss, losing streak, trades per day, a pause after a trade and open positions, and counts only the paper trades of its book. At most 4 "Paper trade" and one "Risk gate" per strategy.
- neuPaper books: you enter the paper account size yourself; it, the virtual orders and positions and the journal of paper trades stay on this PC in builder.sqlite – passed to no AI and otherwise to no one except what you take from them into an alert. Per book at most 300 paper trades stay; those older than 8 days the station deletes as soon as a new one is added. At most 20 books per account; a strategy's own book goes with it, a named book shared by strategies stays, journal included. When the alerts of a strategy go off, the station closes its open paper position without a result and cancels a waiting paper order. A book cannot be emptied by hand.
- geändertStrategie Builder, limits: up to 120 blocks and 240 connections per strategy (previously 80 and 160), alerts still at most 8. As before, at most 12 builder alerts per account and minute go to the phone; anything beyond that appears on the PC only, and the message "Builder: … phone alerts held back" says how many there were.
- geändertSetup › DOM levels: 51 price levels per side out of the box instead of 15 (the bridges for NinjaTrader, ATAS and MetaTrader 5 still deliver up to 40 per side); a saved value stays.
- geändertStrategie Builder: when a market rolls to a new contract, the memory of all blocks starts again (note "contract changed …"), and an open paper position closes without a result. If a strategy uses "News" without your consent to the economic calendar, the builder warns ("Economic calendar is off …") – the news gates then stay unknown. Without a loaded calendar, or with one older than 7 days, the news gates stay unknown as well.
- behobenStrategie Builder: a saved strategy of your own with overlapping boxes is untangled once when opened – a single undo step takes it back. When the window reports another signed-in account, it also clears the strategy selection, "Wishes" and "AI runs", and after a sign-out it saves nothing until the station confirms the account.
- neu"Analytics" window: a new 5m timeframe after 15m, with 10 trading days like 15m. The bars come from the 5-minute series the station already fetches for the volume profiles – no extra request to TradingView, the consent stays; as for 15m, it builds the running day from its own prices where it receives the market. A day without 5-minute candles gets no bars – never a substitute from 15m – and a hint in the tooltip of the field at the top right. "AI analysis" also works on 5m (at most 60 bars, i.e. five hours). Manual chapter 25.
- geändertChart, right-click: "Winkler Standard · built in" and "Winkler Signal · built in" are no longer in the menu. The built-in templates are loaded in the "Profiles & Templates" dialog (right-click › "Manage profiles ..." or the "Profiles" button), with the same question before a palette swap, "Winkler Signal" still only with Ultra Signal. The "Winkler" and "Winkler Signal" palettes and the first start with "Winkler Standard" remain. Entries "Winkler …" without "· built in" in the menu are profiles you saved yourself.
- neuChart and heatmap, right-click: a circular arrow now stands in front of "Reload historical data", and the ticks have a column of their own – rows with a tick, without one and with an icon start at the same edge, in both interface styles and in light palettes.
- geändertSetup › CVD: the switch is now called "Signals on the chart (lines + arrows)" (previously "Signal arrows") and hides the yellow lines along with the arrows – the V1 divergence line and the V2 line for double tops and bottoms. Sound and message stay with "CVD signal" and "Alert on a new signal"; the switch works per window.
- behobenES SPEED and the PC clock: the silence in the box now counts from the arrival of the prints instead of their time stamps – no more "no ES print for …" while prints are coming in. Where the prints' time stamps deviate from this PC's clock, the station says so, for instance "ES time stamps 26 min behind this PC's clock - sync the Windows clock while flat" – in the box, under Setup › NinjaTrader bridge ("Clock:"), in the dashboard, in the tooltip of the NinjaTrader badge and on the phone. When no ES prints arrive, the box names the reason – NinjaTrader not connected, the bridge too old to re-order, or the order not taken – instead of just "waiting for prints".
- geändertClock and real money: if the Windows clock goes back by more than has passed since arming or the last live order, the station disarms – so set the clock while flat and arm again afterwards. The live price test behind the bell in the "Analytics" window, the AI level alerts, auto mode, the Strategie Builder and the AI Analytics scalp levels now also counts the arrival of the prints: when the PC clock runs behind or MetaTrader 5's broker time runs ahead, it switches off after ten minutes of real silence; before, it stayed on. The scalp levels then come from TradingView's candles, as without a live price.
- geändertTerms and privacy statement in version 1.8: new are the paper books of the "Paper trade" and "Risk gate" blocks – only on this PC in builder.sqlite, passed to no AI and otherwise to no one except what you take from them into an alert – and the 5-minute bars in the Analytics window, built without an extra request. Every account confirms both again at the next sign-in – no sign-in without both ticks. The TradingView consent stays as it is.
- geändertManual (PDF) and Builder Guide are brought up to date, among others chapter 5 (time stamps next to this PC's clock), 25 (5m) and 26 (the new blocks, "Paper trade"). No NinjaTrader restart needed – the bridge is unchanged.
1.9.105Date unconfirmedshipped
- neuBuilder Guide: a guide to the Strategie Builder in a window of its own, opened only from the builder – with the "Guide" button or with "What does this mean?" next to a problem. 14 chapters in German and English with screenshots, all 46 blocks, and the problem codes with cause and remedy. "Show in builder" loads an example into the builder as an unsaved copy, after asking. For this window 1.9.105 brings a new version of the desktop app; the update installs it as well.
- geändert"Build Strategie" is now called "AI Creator" and still needs the Claude CLI and the AI Analytics unlock. Claude first proposes a plan, and building starts only on "Build"; the "Build without asking" switch skips the plan. Claude only combines existing blocks, never writes code and never places orders. If a block is missing, it says so, and a partial solution is labelled as such; "Save as wish" keeps the wish on this PC only (at most 100, nothing is sent). Nothing is saved or switched on by itself. Plan and build go, on your click, through your Claude CLI to Anthropic (USA) and may incur costs there.
- neuStrategie Builder: the "What the builder needs" window lists, when the builder opens and whenever a new obstacle appears, what is holding up alerts or AI runs – a missing consent, unlock or price feed, for instance – and where to fix it. Consent is only ever given by the user.
- geändertClaude models: every AI picker offers Fable 5.1, Opus 5.5 and Sonnet 5.5. A saved older model keeps working and is listed in the menu as "Saved: …".
- neuAnalytics, auto mode (off out of the box): on request "AI analysis" runs by itself per market every 1, 5, 15 or 60 minutes – only while an Analytics window of that market is open and live prices are coming in, and only for a signed-in account with AI Analytics and TradingView consent. For this the window asks for your own consent, revocable at any time: each run sends the same data as the click to the chosen provider – Anthropic, OpenAI or Ollama's cloud service, in the USA; a local Ollama model stays on the PC – and may incur costs there. With the Claude CLI and the Codex CLI at most every 5 minutes, at most 480 runs per account and day.
- neuAI level alerts ("Alerts" button in the Analytics window, off out of the box): a message and a sound when the price comes close to a level or zone of the latest AI analysis ("Close at", 8 ticks out of the box) or touches it – in the chart windows, the heatmap and the DOM ladder of that market, and with "Send to phone" on the phone as well. "Paint in chart" draws the levels in chart and heatmap. They are checked only against a fresh live price, also with the Analytics window closed; the levels expire after 2 to 3 hours. "Clear AI" in the Analytics window also removes the station's levels for that market. These are messages only – no orders, no investment advice.
- neuNew announcements for the AI level alerts (Setup > Sounds): "Support area (AI)", "Resistance area (AI)", "Long level (AI)" and "Short level (AI)". They speak only with the station's sound switched on and only when no other announcement is speaking or waiting – otherwise a beep sounds.
- geändertAI Analytics, scalp levels for NQ and ES: with fresh live prices the station computes them every 5 minutes from its own one-minute candles, without fetching from TradingView, otherwise every 15 minutes from TradingView's candles as before; TradingView consent remains a requirement. The band follows the current volatility (ATR), the text names the measured shares per side and the age of the data, and the direction changes only after two matching runs and carries the note "no proven edge". "Hit rate": each report is graded against the station's live candles after 15 minutes; rates appear only from 30 windows on.
- neuPhone: builder signals and painted AI levels appear in the phone's chart and heatmap; AI level and builder alerts arrive as a message, with sound after a tap on "Tap to enable sound". Alerts older than 2 minutes, or arriving while the page is hidden, go to the "missed" list. The 30-second gap for alerts on the phone now applies per strategy instead of per account. As before only while the WTS page is open – no push notification.
- geändertTerms and privacy statement: only the texts have been brought up to date, among other things on auto mode, AI level alerts and the AI Creator. Version 1.7 and all consents given so far remain, and there is no new confirmation at sign-in. The manual (PDF) has the new sections 25.7 (auto mode and AI level alerts) and 26.14 (Builder Guide). No NinjaTrader restart needed – the bridge is unchanged.
1.9.104Date unconfirmedshipped
- neuStrategie Builder: a new window, opened only from the dashboard ("Builder" button). On the left are the blocks – the station's indicators, data from the Analytics window, results of AI Analytics, AI evaluations of your own (Claude CLI, ChatGPT through the Codex CLI, Ollama), values, rules and alerts; Analytics and AI blocks only with the AI Analytics unlock. You drag them onto the canvas with the mouse and connect them with lines. Added to that are a light/dark switch, an overview map and two examples: "Price crosses VWAP" (simple) and "VAH rejection short, AI-confirmed" (complex). The instructions are in the window ("Guide") and in chapter 26 of the manual.
- neuStrategie Builder: what comes out is alerts only, never orders – a message in the dashboard, the chart and the builder, a sound (only with the station's sound switched on, Setup > Sounds, off out of the box) and optionally a message on the paired phone, there only while the WTS page is open (no push notification). The station checks every strategy that is switched on once a second, every 5 seconds under heavy load, also with the builder window closed, as long as it runs and your account is signed in. An alert rings when its condition becomes true, not already when you switch it on. Where a market runs only on the built-in simulator, its price and indicator blocks stay unknown, alerts based on them do not ring and no AI run starts; a Sim101 account with real prices is not affected.
- neu"Build Strategie" (only with the Claude CLI and the AI Analytics unlock): you describe a strategy or paste pictures, Claude builds blocks and connections, and the station checks the result and offers only an error-free one for you to take over; nothing is saved or switched on by itself. On your click the description with the conversation so far, the pictures, the open strategy when refining, and the block list including the blocks locked for your account go through your Claude CLI to Anthropic (USA) – no market, account or order data. The station deletes the pictures after the build. Each build may incur costs at Anthropic.
- neu"Share Signals": every signal of a strategy appears as a marker in the chart and the heatmap of its market; the "Builder signals" switch hides them.
- neuStrategie Builder, AI blocks: a run on click ("Run now") or by itself at intervals from 5 minutes or on a trigger – by itself only with the strategy switched on and only after your own consent in the builder, revocable at any time, at most 60 runs per account and day. Each run may incur costs at the AI provider.
- geändertTerms and privacy statement in version 1.7: new are the AI runs of the Strategie Builder, which after your separate consent also start without a click, "Build Strategie" with Claude (Anthropic, USA), builder alerts on the paired phone and the new local file builder.sqlite. Every account confirms both again at the next sign-in – without both ticks, no sign-in.
- geändertTradingView: the station asks for consent once more (in the Analytics or the AI Analytics window), because Analytics blocks of strategies that are switched on fetch candles also with the window closed. Until you consent again it fetches nothing from TradingView: Analytics shows no candles, AI Analytics computes no new reports, not in the background either, and the builder's Analytics blocks stay locked. No NinjaTrader restart needed – the bridge is unchanged.
1.9.103Date unconfirmedshipped
- behobenReal-money account (for instance Tradovate through NinjaTrader): after Flat, or when the stop or the target fills, the cancelled lines leave the chart, the heatmap and the DOM ladder as soon as NinjaTrader reports the cancellation – the station no longer waits for its one-second beat, and the picture follows in under half a second. Up to 1.9.102, on a real-money account whose broker swaps the order number on submission, they stayed for seconds after the exit although NinjaTrader had cancelled them at once; not on Sim101. They were copies of the stop and the target that the station built from NinjaTrader's very first report: even before the exit four lines stood in the picture instead of two, and dragging a copy moved nothing. Now the picture shows one line each for stop and target, and a drag reaches the order at NinjaTrader also after the broker has swapped its number.
- behobenBracket: after the exit, up to 1.9.102 the station reported "NinjaTrader cancelled nothing … – recompile the AddOn (F5)" every second – wrong advice, NinjaTrader no longer held the order at all. With the bridge 1.9 or newer it now says what it knows: NinjaTrader holds no order of the group any more, and it reads NinjaTrader's order list again.
- geändertIf a report from NinjaTrader on the stop or the target goes missing after Flat or after the stop or the target filled – say the cancellation of the partner – the station asks for NinjaTrader's order list after a few seconds instead of waiting for the check every 30 seconds: if the list no longer holds the order, its line goes; for the risk limits it counts as open until a second list confirms it. An order whose cancellation is still on its way keeps counting as well. For other orders, a hand limit order for instance, the check every 30 seconds remains.
- geändertManual (PDF), chapter 7: new paragraph "Linien folgen NinjaTrader" (lines follow NinjaTrader). No NinjaTrader restart needed – the bridge (DeepWebBridge.dll) is unchanged.
1.9.102Date unconfirmedshipped
- neuAnalytics: where the station has the market's price live – never from the simulator or MetaTrader 5, and matching TradingView – the chip at the top right reads "Live": the running candle (in 4h, 1h and 15m the newest bar) follows that price, and the window asks for it four times a second while it is visible. Completed candles, profiles and key levels still come with the refresh every 30 seconds. Otherwise the chip reads "Auto 30 s", and its tooltip names the reason. Switched off, the chip reads "Auto off": the candles stand still, the running candle too, and with them the profiles and key levels – "Refresh" fetches them by hand; GEX, option trades and news, where switched on, keep updating at their own pace, notes shared from other windows still arrive, and the bells keep running on the live price.
- behobenNotes: the fields of a note – ×, bell, share and colour – stay fully inside the picture in the chart, the heatmap and Analytics. Up to 1.9.101 they were missing where their row did not fit, for instance on a ray or line up to the newest candle or at the top edge; now the row moves – to a free spot of the same note, on a rectangle or zone into its visible part. The rows of two notes do not overlap: draw several rays from one point to the newest candle, and each carries its fields at its own end or stroke, and every × deletes the ray it stands on; point at a field, and the picture highlights exactly that note. Only where no room is left at all does one row lie on another, and the click hits the upper one. In the chart a row never moves under the Focus, Follow and Reset buttons, the SPEED and AI NEXT 3 boxes or the account and PANIC box, in the heatmap never under Focus, Follow and Reset and, where the account and PANIC box lies over the picture in focus mode, never under it.
- neuAnalytics: a right click on a free spot opens the window menu, as in the chart and the heatmap. "Remove all drawings" removes every drawing of your own in the window on this market in one click, without asking; the message gives the count, AI marks and shared notes from other windows stay, and with nothing to remove the entry is greyed out. "Take screenshot" saves the picture of the window.
- neu"Take screenshot" in the right-click menu of the chart, the heatmap and Analytics saves the picture as a PNG file on the Desktop – the one Windows keeps for you, also when OneDrive moved it. The name gives window, market, date and time, in the chart and Analytics the timeframe too; an existing file is never overwritten, and the message names the full path. You pick another folder in Setup under "Screenshots" ("Use this folder", back with "Reset to Desktop"); a folder that no longer exists is reported instead of silently falling back to the Desktop. In the chart the entry replaces "Save screenshot" and shows the chart with the DOM and Speed panels as far as they are on screen.
- geändertManual (PDF): chapters 7, 11 and 25 updated, section 10.1 "Screenshots" new; in the "Learning plan: auction theory" step 12 names "Take screenshot" and the folder under Setup > Screenshots.
1.9.101Date unconfirmedshipped
- neuAnalytics: besides the daily candles, the timeframes 4h, 1h and 15m (45, 20 and 10 trading days); 4h and 1h are built from TradingView's 15-minute bars, without a further request. Where the station has the market live itself – never from the simulator or MetaTrader 5 – and its price matches TradingView, the running day comes from the station's own data ("running day - station feed").
- neuAnalytics: the "Key levels" switch shows the prior day's high, low, close, POC and value area, the overnight high and low, the initial balance, the prior week's high and low, naked POCs and HVN and LVN. The "News" switch marks what matters: the major US releases are built in, and – each source only with your consent – your calendar archive, items from the English Wikipedia ("Portal:Current events") and White House presidential actions are added. The selection is made by a machine; important news can be missing.
- neuAnalytics: "GEX" and "Option trades" from Cboe's option data, delayed by about 15 minutes, for ES, NQ, RTY, YM and their micros only – call wall, put wall, gamma flip, positive and negative gamma zones and the gamma regime, plus big option trades from about 1 million dollars premium (diamond = call, square = put). These are approximations: GEX rests on a model, whether a trade opens or closes is estimated, and big trades can be missing.
- neuAnalytics: the "AI analysis" button with the same providers, models and effort levels as in the chart (Ollama, Claude CLI, Codex). On your click the candles, profiles and key levels go to the chosen AI provider, GEX, option trades and news only when they are switched on in the window. The answer appears as text and as marks in the chart; "Keep as note" turns a mark into a note.
- neuNotes: rectangle, line, ray and pen get a colour field in the chart, the heatmap and Analytics; a click on it shows six colours (Orange, Red, Green, Blue, Teal, Magenta) and "Palette colour". A shared note appears in the other windows in the colour tone of its source, even when it follows the palette in its source.
- behobenTrading with the mouse: dragging an order (chart, heatmap, DOM ladder) or the position line ends without effect when the release got lost (for instance over a system dialog or after Alt+Tab), on Esc, on a second mouse button or on a press next to the picture. Up to 1.9.100 the release or a later click could then still move the order or place a stop. Dragging back to the starting price sends nothing, the middle button no longer places an order in the heatmap, and a click on the SPEED or AI box in the chart no longer cancels an order beneath it.
- behobenLight look: in Analytics the selectors and text fields are light on the light skin; the switched-on Follow chip is readable on a light picture (heatmap colours "Hell", chart with NT Light).
- geändertAI in the chart and in Analytics: qwen3.5:cloud, which Ollama switched off on 25 September 2026, gives way to the configured default, now kimi-k3:cloud out of the box, with a note before the answer. kimi-k3:cloud is a cloud model too – the data leave the machine.
- geändertTerms and privacy statement in version 1.6: new are Cboe, Wikipedia and the White House (USA) as recipients – each service only after your consent, asked in the Analytics window when you switch it on, revocable under "Data sources" – and the "AI analysis" button. Every account confirms both again at the next sign-in. The manual (PDF) has the new chapters 25.1 to 25.6.
1.9.100Date unconfirmedshipped
- behobenTop bar: PANIC stays fixed at the right edge together with route, account and feed badge at any window width – in the main window and in the heatmap. Until now, in the main window it lay beyond the right edge and could not be clicked once the window was narrower than about 1240 to 1740 pixels, depending on what the bar held.
- neuTop bar: whatever no longer fits moves into the menu behind the new "»" button and works there exactly as in the bar, with the same keyboard shortcuts. The AI controls give way first, then Profiles, Setup and the sound switch, and last the clock, quotes and timeframe (in the heatmap the clock and quotes); the symbol button always stays. When the window gets wider, everything comes back.
- behobenChart trader: the order list was 0 pixels high – floating at its factory size at every window size, docked up to 1440 × 900 and in the heatmap trader up to 1280 × 720 – so the × for cancelling a single order could not be clicked. Now the list keeps its rows and scrolls within itself; if space runs short, the whole trader scrolls.
- geändertChart trader: when floating it stays fully inside the window and below the top bar, and in focus mode above the PANIC pill – it no longer covers PANIC. If space runs short it gets lower and its content scrolls; dragging stops at the window edge and at the top bar.
- behobenTop bar: with Ollama there is no longer an empty effort selector, and "AI Scan" and "Ai Quick" no longer wrap onto two lines. View bar: when it scrolls sideways in a narrower window, its buttons are no longer cut off at the bottom – the bar grows a little taller for that.
- geändertThe manual (PDF) has been brought up to date: chapter 3 on the top bar is rewritten, with the "»" menu, its order and new pictures; there and in chapter 7 it now says that the top bar has no dashboard button – the dashboard opens from the right-click menu in the chart.
1.9.99Date unconfirmedshipped
- behobenSign-in window: nothing jumps any more while the name is being checked. The box about the terms and privacy policy appears in a place of its own; Account, Password and Start Trading stay where they are.
- neuSign-in window: the explanation in the box shows a focus ring when you reach it with Tab; the arrow keys scroll it. A mouse click shows no ring.
- behobenNotes in the heatmap and the chart: the right-click menu of a shared note now says "Stop sharing" and takes it back. Until now it said "Share", and the click did nothing. A heatmap zone offers only "Share" or "Stop sharing" and "Delete".
- behobenChart: a right click on a drawing's share field, bell or × only opens its menu and changes nothing. Up to 1.9.98 it toggled sharing or the bell, or deleted the drawing.
- behobenChart, heatmap and Analytics: when a second window of the same kind changes the notes, an open note menu closes; the next right click shows the new state. Before, it stayed open with an outdated label, and its click did nothing.
- geändertAnalytics: if the TradingView consent text is taller than the window, it starts at the top and scrolls – the heading and "I agree" stay reachable. In a narrow main window the button row above the chart no longer cuts off the top of its buttons.
1.9.98Date unconfirmedshipped
- behobenSign-in window: when the box about changed terms and privacy policy appears, the Account field, Password, both ticks and Start Trading stay visible; the explanation scrolls inside the box. In 1.9.97 the box pushed the Account field out of view.
- geändertAnalytics: light and dark (Hell and Dunkel) are now one button with the half-circle sign ◐ as in the DOM ladder, right before "Fit"; a click switches the window's colours.
- neuHeatmap: a right click on free space now offers "Remove all drawings" at the bottom, as in the chart. It removes all of the heatmap's own notes and zones on this market at once, without asking, and reports how many; the chart's own notes and shared notes from other windows stay; what the heatmap itself had shared disappears there too.
1.9.97Date unconfirmedshipped
- geändertThe bridge script for Bookmap has a new revision – only texts changed, protocol 1.9 stays the same. The old build keeps delivering and trading; the update is voluntary. In Setup the "Bookmap bridge" card then reports "an OLDER script is installed": click "Update script", then press Build in Bookmap's Python editor and attach the built JAR under Settings > Configure add-ons.
- geändertThe terms and the privacy policy are now at version 1.5. Every account confirms both again at its next sign-in – without both ticks there is no sign-in. The dialog names the changes, among them: real-money trading, AI Analytics including Analytics, the phone tunnel and the signal mode are unlocked by the provider per account, and a withdrawal takes effect within one minute; the phone tunnel is described – its data runs through the provider's hub, logs are kept for 7 days at most; TradingView, Binance and the economic calendar only after a separate consent; contact info@winkler-trading.de.
- neuThe DOM ladder shows your position and your own orders – SL in red, TP in green. Dragging moves an order to another row; a click on it places nothing. An order moves only on a fresh book: with no book, no timestamp or a book older than two seconds no drag begins and a release moves nothing – the ladder then states the reason.
- geändertThe ladder's "Trading" drawer is gone. At the bottom now sits the trading row with Flat, Hide, route/account, Qty, SL, TP and PANIC; route, account, arming, Cancel, History and the order list are in the chart trader. A number you typed but have not yet confirmed (Qty, SL, TP) is taken over by the next click into the ladder – left or right. That click places no order; only the next one trades. For the market order on the right button the press is what counts: only a press on the plate shown trades, never a press that closes the Settings menu. Flat and PANIC work as before: Flat closes this market and leaves arming in place, PANIC closes the whole account and withdraws arming.
- behobenLadder: in 1.9.92 a market order also went out when the right click closed the Settings menu, when the book was too old at the press and only fresh again afterwards, or when the market changed while the button was held. Since 1.9.97 nothing goes out in these cases.
- geändertIn chart and heatmap an order button sends nothing when taking over the typed number rewrites it – for example SL -5, which switches the stop off, or Qty 2.6, which becomes 3; the message names the value that now applies. If the number stands as it was typed, the button acts at once.
- geändertTrade values now follow live: quantity, broker, account, route, OCO, hide acct and the five bracket ticks (SL, TP, trail, break-even trigger and offset) apply at once in every open chart and ladder window, across all markets. Caution: ticks are ticks of the market in question – SL 40 in the NQ window also means a 40-tick stop in the CL window. The heatmap's trader keeps its own values and does not follow.
- geändert"hide acct" now covers only the name and the balance of real-money accounts. Chart, heatmap and ladder show P/L, SL/TP amounts and the drag preview even with hide acct on – whoever shares the screen shows them. Closed results are hidden only by "P/L label at the exit" (chart) and "Trade P/L" (heatmap).
- neuNew is the "Analytics" window, opened from the button beside "DOM" in the chart: 30 daily candles plus the running day, a market profile and a volume profile for each day, with drawing tools. The candles come from TradingView's public feed, delayed by about ten minutes on the CME. The window is available only with the AI Analytics unlock – not a new right – and after your consent to the transfer to TradingView (USA); AI Analytics now needs the same consent.
- neuEvery drawing in the Analytics window carries a bell and a share switch. The bell never rings on the delayed candles, only on the station's live price – source connected, never the simulator, at most ten minutes old – and only while the window is open; the footer says why it is off. A contract change (roll) does not ring; the bell re-arms on the new contract. Sharing needs no fresh price: shared notes stay in chart and heatmap during the CME pause and at the weekend too.
- geändertThe station loads crypto prices from Binance and the economic calendar from Fair Economy (USA) only after your consent per service and only for a signed-in account. It asks at the "BINANCE: allow?" badge, at the "Economic calendar off" line or at the tiles in the dashboard; "Withdraw" takes the consent back at any time.
- behobenChart zoom: zooming in made candles vanish on the right, and only a drag brought them back.
- behobenThe consent buttons are readable, and so are the red badges in the Classic style such as "no feed" and "Server offline".
- behobenInstaller: the logo is sharp – with images of its own for 100 to 250 % display scaling – and the ticks on the last page are readable.
- geändertThe numbers of the swing indicator stay in place while you drag.
- geändertWith a scale of your own, Follow now also keeps the price in view.
- geändertDynamic Zones show the whole value area in orange.
- neu"Hide" beside Flat hides the gesture rules and the OCO line of the ladder.
- geändertThe manual (PDF) has been brought up to date, with the new chapter 25 on Analytics.
1.9.92Date unconfirmedshipped
- neuThe "DOM" window now accepts orders: a click in the ladder sends one. The left mouse button places a limit on the row you clicked, the right one sends market – and deliberately ignores the clicked row, because a market order "at this price" would be a claim about the broker that nobody can keep. The column decides the side, never the half of the window: the buy column buys, the sell column sells, and in every arrangement at least one column between them does nothing at all – so a missed aim at the edge cannot flip the side. Mind the first use: in the heatmap the right mouse button cancels a placement in progress, in the ladder it triggers a market order. Everything that sends orders still hangs on the live-trading permission.
- neuWhat you see goes out – and only that. Before the press, a plate under the pointer names side, type, quantity, price and the hint "right = MKT". The order goes out only if the click yields exactly what stands there. Where nothing lights up, no order goes out: the first press shows what it would do at that spot, the second does it. The header, the two total rows, the price column, the collapsed gap and the outer three pixels never take an order.
- neuThe ladder refuses rather than guess, and says why every time: no book, a book without a timestamp, a book older than two seconds, a book belonging to another instrument, trading locked. Age is measured from arrival and not only by the stamp of the feed – a clock that runs ahead no longer paralyses trading, while a feed that has fallen silent is still caught after two seconds. If the stamping clock runs ahead, the footer says so in its own words.
- neuA drawer in the ladder carries the full control panel: quantity, broker, account, route, the five bracket ticks, OCO, account mask, arming, history, cancel, PANIC and the list of working orders. They are the same settings as in the chart, not a second set – a click in the ladder sends exactly what the chart trader would send.
- neuA Flat button in the foot of the ladder closes the position in this instrument at market and cancels its working orders, at once and without asking. The difference to PANIC belongs with it: Flat applies to this one instrument only and leaves the live-trading permission standing. PANIC applies to the whole account and withdraws it; it still sits in the drawer.
- neuThe ladder can be set light or dark through an icon of its own beside "Top". The switch colours the canvas and the window frame, not merely the figures.
- geändertThe five drawing tools of the heatmap – dynamic zones, rectangle, line, ray and pen – now sit in the toolbar directly beside "Indicators / Settings" instead of inside the opened menu. A tool gets switched while drawing, and until now every switch cost the way through the closed menu. Their settings stay in the button, in the "Notes" group; the badge of the armed tool now carries that tool's colour. The status line paid for the space: on a narrow window it truncates earlier.
- behobenThe white separator line in the ladder's gap lay across the figures and has been dropped. Where the market stands is told by the yellow last-price mark and the empty rows of the gap.
- behobenThe toolbar of the heatmap could grow wider than its window; on a narrow window the disarm button lay outside it and could not be clicked.
- geändertThe user manual (PDF) has been brought up to date with this version, with a chapter of its own on trading in the ladder.
1.9.89Date unconfirmedshipped
- neuA new "DOM" window shows the price ladder, opened from a button in the chart beside the heatmap and from the dashboard. For each price it lists the size resting on the bid, then what traded at that price on the bid, the price itself in the middle, what traded on the ask, and the size resting on the ask. The header names the period the traded figures cover – the session from the first stored transaction, or the last N candles instead. The total rows add up the 15 delivered levels per side, not the true depth; what lies beneath them the station cannot know. The ladder accepts no orders in this version, and the page says so.
- geändertLarge resting sizes are no longer drawn as a row of outlined boxes in the heatmap but as one continuous horizontal bar that ends exactly where the size drops below the threshold. A band appears only from eight times the median visible book upwards, adjustable under "Liquidity" through "x median" and "floor"; when nothing unusual rests in the book, the layer draws nothing. The footer names the threshold currently in force. A band means "this much lay at this price for this long" – the protocol knows nothing about individual orders.
- neuA swing indicator in the chart, reached through the "Swing" chip and off by default, joins turning point to turning point and writes volume and delta onto every leg. Colour sets effort against result: an upward leg on more volume than the one before is blue, on less it is red, and for downward legs the other way round. Legs that reach into candles without real order flow show a dash instead of a zero.
- neuThe heatmap gains drawing tools: dynamic zones, rectangle, line, ray and pen, each with its own notes and a colour menu. The dynamic zones work from the same server figures as in the chart, including time window, coverage and status.
- neuChart and heatmap show the money at stop and target permanently. One figure changes with it: the amount is now calculated from the quantity the order actually protects – a one-contract stop beneath three contracts shows a third of what it used to. The previous value was too high. The account mask hides the amount.
- neuBeside the bell sits a switch that publishes a drawing. Other windows on the same instrument show it paler and without handles; it is edited where it was drawn. Whatever a time axis cannot carry honestly is counted rather than painted; horizontal lines are price marks and stay visible throughout.
- behobenData loss fixed: two windows – two charts, two heatmaps, even on the same instrument – used to overwrite each other's drawings, zones and settings, and whoever saved last won. Both windows now read and write the shared state correctly and follow each other at once.
- behobenAn error in a drawing layer could leave the clip on the price area in place: the price axis, the bid/ask marks and the sub-panes froze while the chart kept running. Every layer now unwinds its state in all cases.
- neuA card for the Bookmap bridge now sits in Setup, with an install button; the bridge ships for the first time. Bookmap does not run the file itself but the package built from it – so the card states separately which protocol version is connected and whether Bookmap really runs on this file, by its content stamp. It never claims a build is unnecessary when it cannot know that.
- geändertThe user manual (PDF) has been brought up to date with this version.
1.9.85Date unconfirmedshipped
- neuThe volume profile now appears in the heatmap as well, with the same settings as in the chart – type, side, width, opacity, POC, value area, HVN/LVN, rows and dimming outside the value area – in the new "Volume profile" group under "Indicators / Settings". It shows the running session, on the left at 24% width by default, so the live right-hand edge stays clear. The bars are scaled to the visible price window; when the POC lies outside it, the label names it with an arrow and its price. The profile is display only and sits beneath all order and position lines.
- behobenGrouped profile rows – "Rows" from 2 upwards, or automatically when you zoom out – sat on the first tick of their group instead of its middle; with Rows=4 the yellow POC row lay 1.5 ticks away from the POC price. Every row is now centred on its ticks, in the chart as in the heatmap. Ungrouped profiles are unchanged.
- behobenAn error in the volume profile can no longer push out the order and position lines; the profile's label reports it instead.
- geändertThe user manual (PDF) has been brought up to date with this version.
1.9.84Date unconfirmedshipped
- geändertComing from a version before 1.9.70, the update also brings a new NinjaTrader bridge (1.11). NinjaTrader only loads it at start-up, so do this once, in this order: close NinjaTrader, update and start the station, then start NinjaTrader.
- neuYour phone becomes a second screen: chart, heatmap and footprint, in landscape as well. It pairs by QR code, and the code works only once – the first successful pairing uses it up, so a filmed code is worthless.
- neuYou can trade from the phone as well: BUY and SELL, and in landscape, if you like, through slim buttons on the right-hand edge. An account sheet of its own shows account size, day and open P&L, every open position and order, your finished trades and the panic button; one switch hides the account name and money amounts. A real-money account is armed there with its typed name as proof, just as on the PC.
- neuThe dashboard has an "Open Orders" tab: every running position and working order across all accounts in one list.
- geändertSpeed of Tape now measures a reference instrument rather than the market on screen, ES by default: you trade NQ and read alongside whether ES is speeding up. Colour, arrow tip and wording name the same side – green and pointing up for buyers, violet and pointing down for sellers.
- neuThe interface style can be chosen, Modern or Classic, at sign-in and in Setup. There, "Edit all colors" opens all 67 palette colours grouped by section; a changed colour takes effect at once, open windows included, and palette, template, profile or "Reset colors" ask before they replace colours you set yourself.
- geändertThe chart's "Trades" switch is now called "Past trades" and hides past trades only – until now it also took away the open position, working orders and the draggable stop and target lines. In the heatmap the "My orders" switch is gone: position, orders, stop and target are always drawn once their price is on screen.
- behobenIf you opened a position without a bracket and then dragged stop and target out of it, the second leg you dragged vanished again a moment later. The second drag now completes the existing bracket into a true OCO pair: when one leg is triggered, NinjaTrader removes the other itself.
- behobenWhat is not on screen can no longer be operated: an order, stop or target just outside the visible price range could still be clicked and dragged, and in a heatmap without data a click into the empty picture could move or cancel an order. After a symbol change, chart and heatmap now show only the position and orders of the loaded contract.
- behobenGaps in the chart: across a rollover the previous contract could slip into the tick history, and a gap in the history only closed after a manual "Reload historical data". The bridge now requests history without merging, and after every load the station checks that it reaches the live edge and reloads by itself when there is a gap. At the quarterly roll the switch now happens three days before the last trading day instead of eight; energy and metals stay as they were.
- behobenWith data feeds that stamp their prints on a different clock than the order book and the quote – via a prop provider, for instance – CVD and the Winkler AI Tracker stayed empty in the heatmap. The recording now keeps one time axis and re-anchors itself once a clock offset is confirmed; the tracker also no longer drops out for a while with "needs 60 s of data".
- behobenTrade marks sometimes stood beside their candle, and trades from the phone stayed missing until a trade came from the PC: the paper trading book stamped its fills with two different clocks. It now uses the tape's clock only, and the trade history orders by the journal's sequence instead of by clock – so older entries are right as well.
1.9.46Date unconfirmedshipped
- geändertSignals now run off a single setting - V1 + V2, V1 only (divergence), V2 only (double top/bottom), or off - instead of two separate checkboxes. Existing workspaces start on "V1 + V2" once.
- geändertSignals are drawn in the chart only. The CVD pane stays clear, and you no longer need it open to receive a signal at all.
- geändertBoth signals, divergence and the double attempt, now need the Ultra Signal entitlement. Up to 1.9.45 the divergence line was visible to everyone.
1.9.45Date unconfirmedshipped
- geändertThe licence server controls have been taken back out of the sign-in page and the settings. The server move is finished and the old address forwards, so there is nothing left to switch by hand.
1.9.44Date unconfirmedshipped
- geändertAccount, entitlements and updates now come from winkler-trading.de. The old address stays valid and forwards there; nobody needs to change anything.
- neuThe licence server can be switched by hand, on the sign-in page under "Licence server" and in Setup – for when a company network blocks one of the addresses.
- neuDouble tops and bottoms as a signal: two attempts at the same price without order flow, with a sound of their own.
- behobenTwo fixes to your own trades on the chart: a trade inside the running candle now sits on that candle, and the marks no longer stick to the edge when you scroll back.
1.9.42Date unconfirmedshipped
- neuA journal mode records every trade on the account selected in the trader: one chart image at entry and one at exit, together with the view you were using and the state of the market at both moments. The switch sits next to the heatmap and carries a red dot while recording is on.
- neuA separate journal window lists the recorded trades with both images and nine figures, among them best gain, deepest drawdown, gains handed back and holding time. Notes can be filled in quietly later or, if you prefer, requested right after the trade; the list filters by period and account.
- neuClosed trades are drawn on the chart: entry, exit, a dashed line between them and the result beside it.
- behobenCompleted trades are told apart correctly again. Previously weeks of activity could be glued into a single round that never happened, which is why recent trades were missing from the chart; chart markers, trade history, dashboard and journal were all affected.
1.9.39Date unconfirmedshipped
- geändertThe version shown in the screenshots of 5 September 2026 on this page. Up to here only the station itself keeps a full list of changes, under Help, loaded from the licence server at start-up. From 1.9.42 onwards the main changes are on this page as well.
1.9.26Date unconfirmedshipped
- geändertThe version shown in the screenshots of 29 and 30 August 2026. The station itself keeps the full list of changes under Help; it is loaded from the licence server at start-up and therefore does not live on this page.
1.9.15Date unconfirmedshipped
- neuAI Analytics: a receive-only window for prepared market analyses. No input field, no request button — the only control switches the feature on or off.
1.9.14Date unconfirmedshipped
- neuReal-money trading can be set up in the interface: the master switch, arming per account and the live password previously lived in the configuration file only and needed a server restart.
- neuSakura, a fourth colour palette: light paper with pink for up and indigo for down, so the direction stays readable with red-green colour blindness.
1.9.11Date unconfirmedshipped
- geändertThe dashboard always opens after sign-in; the switch to suppress it is gone. Closing it closes the chart and heatmap windows with it.
1.9.9Date unconfirmedshipped
- neuHelp, wiki and support channel in the dashboard, bilingual; the language choice is remembered.
1.9.7Date unconfirmedshipped
- neuA dashboard of its own: connections, accounts, order route and the day's balance side by side instead of scattered.
1.9.0Date unconfirmedshipped
- behobenThe shipped bridge DLL version stamp is checked against the protocol constant in the source; a build with a stale DLL now fails.
- geändertSetup lists the installed and the shipped version of the NinjaTrader bridge side by side.
1.7.0Date unconfirmedshipped
- neuRuntime market switching: any catalogue root is requested from the add-on on click, the front month resolved and the backfill delivered.
- behobenThe quarterly cycle now rolls on the last trading day instead of the month marker.

Ready for the order flow?
An account takes a minute. Then 14 days of footprint, delta, order book and tape — no payment details.
Afterwards from €49.99 / month or €999.00 once · books from €9.99 · final prices